IBC MagbarSTA

 

Product Brochure (B&W)
 Product Brochure (color)
SA/STA Series Family
Wiring Options



The Magbar STA is a Stand-Alone barcode and magnetic stripe reader for use in both Access Control and Time and Attendance. With 128k of memory and an internal relay, the STA series is a low-cost solution to controlling door access and providing Time and Attendance tracking. The reader can be downloaded from a pc with valid employee numbers, and access can be limited to specific days and times for each employee by using "schedules". Programming may also be done by hand at the reader. Each employee scan in the reader may optionally be recorded into the internal memory of the reader, along with a date and time stamp. This information can then be uploaded to a PC at any time. Invalid scan attempts may also be logged. The RS422 versions of these readers may be networked together, and the reader can also emulate "J" series readers.

The reader contains 64K of memory (256K optional) for holding employee id's, and also 64K of memory (256K optional) for storing an audit trail. The standard 64K of memory can hold up to 6000 9-digit employee id's.

All you need to control a door and log entries is to install the Magbar STA with an electric strike or magnetic lock, and you're up and running.

For access control or time and attendance which requires monitored access, such as employee ID verification at guard shacks, the STA reader is also available in a portable version with an internal battery.

The STA is available with an RS232 interface, USB, or TCP/IP. TCP/IP readers can be POE w/EZPower which allows a door strike to be powered directly through the POE interface.


Features Applications Interfaces Options
Programmable
Visible or Infrared
1 or 2 Tracks
Internal Relay
Led's
Internal time clock
128K memory
Audit Trail
RS232 Logging
Good Read Beep
-40c to +85c operation
Networkable
Downloadable
"J" series emulation
Portable Version
  available 		Access Control
Security
Time & Attendance

 RS232
RS422/485
USB
TCP/IP
POE
 5,12, or 24VDC
Low/High resolution
Track 2, Tracks 1&2
Tracks 2&3
Time display
512K memory
Weatherproofing
#6 or 3mm mounting
Side or Rear wiring
Internal Battery 
  (portable)
Power over ethernet

    
Specifications
Scanning Speed
Scan Direction
Symbologies
Resolution
Read Height
Magstripe
Good Read Beep
Memory
Slot Width
Indicators
Light Source
Temperature
Dimensions
Weight
Material
Power
Standard Wiring
Relay

Displays 		  3-30 ips (7-76 cm/sec)
bi-directional
Code 39,2/5/I2/5,C128,UPCA,EAN13,Codabar
7 mil (high), 13mil(low)
0.4"(1cm) standard, 0.46" optional
Track 2, Tracks 1&2, Tracks 2&3, hi/low co, hi/lo density
Programmable
128K standard, 512K optional
0.050"(1.2mm)
2 Leds
630nm(visible), 940nm(infrared)
-40c - +85c
4.6"L x 2.4"W x 1.4"H, 11.6cm x 6cm x 3.5cm
6 ounces
Black Polycarbonate
5VDC(150ma), 8-15VDC, or 15-30VDC
3' (91cm) cable w/flying leads or connectors, depending on interface
30VDC 500ma or 5V TTL level (minimal current draw) outputs
12VDC 500ma max direct through POE
8 character display which can display time