Featured Products

Proxcheck

716 Data Converter

901 Fingerprint Reader

 

Smart Class

Iclass® reader with optional barcode and magnetic stripe.

 

  
     
The Smart Class is a decoded RF reader for reading Hid Iclass® cards. The Smart Class reader can also be ordered with optional barcode and magnetic stripe reading capability. The reader is available in many different industry standard interfaces, is programmable, and available with a variety of options, such as leds, relays, and door sense inputs.

 

Cards Supported   HID Iclass®
Scanning Speed (barcode/mag)   3-30 ips (7-76 cm/sec)
Scan Direction (barcode/mag)   bi-directional
Symbologies (barcode)   Code39, 2/5, I2/5, C128, UPCA, EAN13, Codabar
Resolution (barcode)   7 mil
Read Height (barcode)   0.4"(1cm) standard, 0.465" optional
Tracks (magstripe)   Track2, Tracks 1&2, Tracks 2&3
Good Read Beep   programmable
Slot Width   0.050"(1.2mm). Other widths on special request
Indicators   2 leds (programmable)
Light Source (barcode)   630nm visible, 940nm infrared
Temperature   -40c to +85c
Dimensions   4.6"L x 2.4"W x 1.4" H (11.6cm x 6cm x 3.5cm)
Weight   6 ounces
Material   Black Polycarbonate (Noryl optional)
Power   5VDC(150ma), 8-15VDC, or 15-30VDC
Standard Wiring   3' (91cm) cable w/flying leads or connectors depending on interface
Relay  

30VDC 500ma Form C
12VDC 700ma direct from POE
Sense Inputs   TTL level (minimal current draw)
Available Interfaces:   RS422/485
    TCP/IP
    USB
    Wiegand
    ABA (magstripe emulation)
    RS232 wedge
    TTL ascii
    Inverted TTL ascii
    Wand Emulation
     

Programmable
Visible or Infrared Optics (order infrared for Cac cards)
-40c to +85c operation
Networkable
Reads Kronos Cards, Cac cards, Usid cards, Dbids cards, Iclass®

5,12, or 24VDC
0.400" or 0.465" read height
Track 2, 1&2, or 2&3
Led's
Internal Relay
Sense Inputs
Weatherproofing
#6 or 3mm mounting
Side or Rear wiring

Mounting Kit