Featured Products

Qscan Outdoor 2-D Scanner

Qscan Mini Turnstile and Kiosk Wiegand 12V Imager

Ble1 Bluetooth/Prox Reader

Sproxjx Tri-Technology Reader (barcode / mag / prox)

QscanT Turnstile reader Wiegand 12V Imager with prox and 13.5 Mhz

 

 

IBC Software


To view software systems provided by thrid party vendors please see our Systems Providers page.

General Software

3 of 9 Barcode Font Windows   Barcode font for making your own code39 barcodes. This is the TTFfile.
3 of 9 Barcode Font Windows   Same as above, but zipped.
Ibctest Windows   This is a general program for testing readers. Also contains utilities for downloading and uploading AV, DC, SA, and STA series readers. Please note this file is 2MB in size. After downloading, unzip and run the setup.exe file. When asked for the installation directory, enter c:\ibc.
Ibcnettest Windows   This is a program to aid in installing RS422 network readers.
USB Drivers Windows 98,XP   USB drivers for IBC products pre Windows 7.
USB Driver Instructions     Instructions for USB drivers
USB Drivers Windows Vista,7,8 10   USB drivers for IBC products. These are the original manufacturer's USB chip drivers which are recommended for Vista and later.
716 Utility V1.99 Windows   Utility program for the 716 and 718 data converters.
Tcp Utility V4.4 Windows   Utility program for TCP readers. Required for programming TCP parameters in readers and controllers.
Slottest DOS   This program allows you to test and program IBC readers which have RS232 or RS422 interfaces. Useful for testing the response and action of readers when designing your own software. This program may also be used for testing networked readers (protocol), and contains a very easy to use terminal emulation screen.
Slotpoll DOS   This is a test program for testing multidrop (network) readers. It has additional functionality for network testing.
Ibc Flash Utility Windows   Program for flashing all new IBC products except the 716/718 converter.

 

 

SA/STA Software

STA Utility V9.4 Windows   Program for downloading and uploading data from SA and STA readers, including networked readers.
Staup DOS   Program for uploading the employee list from an SA or STA reader.
Stadown DOS   Program for downloading employee data into an SA or STA reader.
Stauplog DOS   Program for uploading the log data from a STA reader.

 

 

DC and DCX Software

Smagdc Windows   Program for uploading data from Smag-dc readers.
Sslotdc Windows   Program for uploading data from Sslot-dc readers.
Dcup DOS   Program for uploading data from Smag-dc readers. Note this program does not clear the data.
Dcupc DOS   Program for uploading data from Smag-dc readers. This program clears the DC data after uploading.
Smagdc1 DOS   Menu-driven program for uploading, setting the time, and clearing data in an Smag-dc reader.
Dcxutil Windows   Utility for the DCx reader
       
DcProx Utility V2.1 Windows   Utility for the DCProx reader (proximity)

 

 

Software Depository

STA Utility V8.4 Windows   Program for downloading and uploading data from SA and STA readers, including networked readers.
Tcp Utility V2.2 Windows 98,XP   Utility program for older TCP readers. Required for programming TCP parameters in readers with version 2.x firmware.
812 Reader/Writer Windows   Read/Write utility for the 812 smart card reader. Requires the VB4 runtime.