|||ibc Smart Slot SA Series

Smart Slot SA

Product Brochure (B&W)
Product Brochure (color)
SA Series Family
Wiring Options

The Smart Slot SA is a Stand Alone barcode swipe reader for use in Access Control. With 64k of memory and an internal relay, the SA series is a low-cost solution for controlling door access. The reader contains 64K of memory (256K optional), which is enough to store 6000 9-digit employee numbers.

The reader can be downloaded with valid employee numbers from a pc, or enrollment of cards can be done directly at the reader.

"Schedules" are also supported in the reader, so that access can be limited to specific days and times for each employee.

All you need to control a door is to install the Smart Slot SA with an electric strike or magnetic lock, and you're up and running.

For access control which requires monitored access, such as employee ID verification at guard shacks, the SA reader is also available in a portable version with an internal battery.

The SA is available with an RS232 interface, USB, or TCP/IP. TCP/IP readers can be POE w/EZPower which allows a door strike to be powered directly through the POE interface.

Features

Applications

Interfaces

Options

Programmable
Visible or Infrared
Internal Relay
Led's
Internal time clock
64K memory
RS232 Logging
Good Read Beep
-40c to +85c operation
Networkable
Downloadable
"J" series emulation
Portable Version
available

Access Control
Security

RS232
RS422/485
USB
TCP/IP
POE

5,12, or 24VDC
Low/High resolution
Time display
256K memory
Weatherproofing
#6 or 3mm mounting
Side or Rear wiring
Internal Battery
(portable)
Power over ethernet

Specifications

Scanning Speed
Scan Direction
Symbologies
Resolution
Read Height
Good Read Beep
Slot Width
Indicators
Light Source
Temperature
Memory
Dimensions
Weight
Material
Power
Standard Wiring
Relay

Displays
Battery Time 3-30 ips (7-76 cm/sec)
bi-directional
Code 39,2/5/I2/5,C128,UPCA,EAN13,Codabar
7 mil (high), 13mil(low)
0.4"(1cm) standard, 0.46" optional
Programmable
0.050"(1.2mm)
2 Leds
630nm(visible), 940nm(infrared)
-40c - +85c
64K, 256K optional
4.6"L x 2.4"W x 1.4"H, 11.6cm x 6cm x 3.5cm (portable slightly larger)
6 ounces
Black Polycarbonate
5VDC(150ma), 8-15VDC, or 15-30VDC
3' (91cm) cable w/flying leads or connectors, depending on interface
30VDC 500ma or 5V TTL level (minimal current draw) outputs
12VDC 500ma max direct through POE
Alphanumeric character display which can display time
Approximate 6 hours of use with alkaline 9-volt battery (portable)

Specifications
	Scanning Speed Scan Direction Symbologies Resolution Read Height Good Read Beep Slot Width Indicators Light Source Temperature Memory Dimensions Weight Material Power Standard Wiring Relay Displays Battery Time	3-30 ips (7-76 cm/sec) bi-directional Code 39,2/5/I2/5,C128,UPCA,EAN13,Codabar 7 mil (high), 13mil(low) 0.4"(1cm) standard, 0.46" optional Programmable 0.050"(1.2mm) 2 Leds 630nm(visible), 940nm(infrared) -40c - +85c 64K, 256K optional 4.6"L x 2.4"W x 1.4"H, 11.6cm x 6cm x 3.5cm (portable slightly larger) 6 ounces Black Polycarbonate 5VDC(150ma), 8-15VDC, or 15-30VDC 3' (91cm) cable w/flying leads or connectors, depending on interface 30VDC 500ma or 5V TTL level (minimal current draw) outputs 12VDC 500ma max direct through POE Alphanumeric character display which can display time Approximate 6 hours of use with alkaline 9-volt battery (portable)